300-115 Cisco

Dumps4download 300-115 Dumps with 100% Confirmed Exam questions and answers. After preparing 300-115 dumps you can easily pass your exam with more than 95% marks. By using Dumps4download 300-115 study material we assured you that you will pass your IT certification or exam with 100% money back guarantee on same day.

Our experts team available 24/7 for your support or your queries related to dumps4download study material. Customer's are very important for us. We are committed with you to help during your study period. You will get the best oportunities in the market after passing your exam with good grades.

Features to use dumps4download 300-115 Dumps

  • Dumps4download data is 100% turstworthy.
  • Good grades are 100% guaranteed.
  • Thousands of satisfied customers.
  • Up to date exam data.
  • 100% verified by Experts panel.
  • 100% money back guarantee.
  • Passing ratio more than 99%

Sample Questions

Free 300-115 Sample Question 1

What is the maximum number of switches that can be stacked using Cisco StackWise?

Read More

Free 300-115 Sample Question 2

A network engineer wants to add a new switch to an existing switch stack. Which configuration must be added to the new switch b efore it can be added to the switch stack?

Read More

Free 300-115 Sample Question 3

What percentage of bandwidth is reduced when a stack cable is broken?

Read More

Free 300-115 Sample Question 4

Refer to the exhibit.

https://www.dumps4download.us/online-quiz/wp-content/uploads/2015/10/11.png

Which set of configurations will result in all ports on both switches successfully bundling into an EtherChannel?

Read More

Free 300-115 Sample Question 5

Refer to the exhibit.

https://www.dumps4download.us/online-quiz/wp-content/uploads/2015/10/121.png

How can the traffic that is mirrored out the GigabitEthernet0/48 port be limited to only traffic that is received or transmitte d in VLAN 10 on the GigabitEthernet0/1 port?

Read More

Free 300-115 Sample Question 6

Refer to the exhibit

https://www.dumps4download.us/online-quiz/wp-content/uploads/2015/10/541.png

A network engineer wants to analyze all incoming and outgoing packets for an interface that is connected to an access switch. W hich three items must be configured to mirror traffic to a packet sniffer that is connected to the distribution switch? (Choose three.)

Read More

Free 300-115 Sample Question 7

After an EtherChannel is configured between two Cisco switches, interface port channel 1 is in the down/down state. Switch A is  configured with channel-group 1 mode active, while Switch B is configured with channel-group 1 mode desirable. Why is the EtherChannel bundle not working?

Read More

Free 300-115 Sample Question 8

An EtherChannel bundle has been established between a Cisco switch and a corporate web server. The network administrator notice d that only one of the EtherChannel links is being utilized to reach the web server. What should be done on the Cisco switch to allow for better Ether Channel utilization to the corporate web server?

Read More

Free 300-115 Sample Question 9

Interface FastEthernet0/1 is configured as a trunk interface that allows all VLANs. This command is configured globally: monitor session 2 filter vlan 1 - 8, 39, 52
What is the result of the implemented command?

Read More

Free 300-115 Sample Question 10

A network engineer notices inconsistent Cisco Discovery Protocol neighbors according to the diagram that is provided. The engin eer notices only a single neighbor that uses Cisco Discovery Protocol, but it has several routing neighbor relationships. What would cause the output to  show only the single neighbor?

Read More

Free 300-115 Sample Question 11

After the implementation of several different types of switches from different vendors, a network engineer notices that directly connected devices that use Cisco Discovery Protocol are not visible. Which vendor-neutral protocol could be used to resolve this issue?

Read More

Free 300-115 Sample Question 12

Several new switches have been added to the existing network as VTP clients. All of the new switches have been configured with  the same VTP domain, password, and version. However, VLANs are not passing from the VTP server (existing network) to the VTP clients. What must be d one to fix this?

Read More

Free 300-115 Sample Question 13

After implementing VTP, the extended VLANs are not being propagated to other VTP switches.
What should be configured for extended VLANs?

Read More

Free 300-115 Sample Question 14

Refer to the exhibit.

https://www.dumps4download.us/online-quiz/wp-content/uploads/2015/12/191.png

Switch A, B, and C are trunked together and have been properly configured for VTP. Switch C receives VLAN information from the  VTP server Switch A, but Switch B does not receive any VLAN information. What is the most probable cause of this behavior?

Read More

Free 300-115 Sample Question 15

Refer to the exhibit

https://www.dumps4download.us/online-quiz/wp-content/uploads/2015/12/204.png

Switch A, B, and C are trunked together and have been properly configured for VTP. Switch B has all VLANs, but Switch C is not  receiving traffic from certain VLANs. What would cause this issue?

Read More

Free 300-115 Sample Question 16

After the recent upgrade of the switching infrastructure, the network engineer notices that the port roles that were once "bloc king" are now defined as "alternate" and "backup." What is the reason for this change?

Read More

Free 300-115 Sample Question 17

An administrator recently configured all ports for rapid transition using PortFast. After testing, it has been determined that  several ports are not transitioning as they should. What is the reason for this?

Read More

Free 300-115 Sample Question 18

Which technique automatically limits VLAN traffic to only the switches that require it?

Read More

Free 300-115 Sample Question 19

What effect does the mac address-table aging-time 180 command have on the MAC address- table?

Read More

Free 300-115 Sample Question 20

While working in the core network building, a technician accidently bumps the fiber connection between two core switches and da mages one of the pairs of fiber. As designed, the link was placed into a non-forwarding state due to a fault with UDLD. After the damaged cable was replaced, th e link did not recover. What solution allows the network switch to automatically recover from such an issue?

Read More

Free 300-115 Sample Question 21

A network engineer deployed a switch that operates the LAN base feature set and decides to use the SDM VLAN template. The SDM t emplate is causing the CPU of the switch to spike during peak working hours. What is the root cause of this issue?

Read More

Free 300-115 Sample Question 22

An access switch has been configured with an EtherChannel port. After configuring SPAN to monitor this port, the network admini strator notices that not all traffic is being replicated to the management server. What is a cause for this issue?

Read More

Free 300-115 Sample Question 23

Refer to the exhibit.

https://dumps4download.us/exam/wp-content/uploads/2016/02/556.png

What is the result of the configuration?

Read More

Free 300-115 Sample Question 24

A network engineer tries to configure storm control on an EtherChannel bundle. What is the result of the configuration?

Read More

Free 300-0-115 Sample Question 25

What is the function of NSF?

Read More

Free 300-115 Sample Question 26

After UDLD is implemented, a Network Administrator noticed that one port stops receiving UDLD packets. This port continues to reestablish until after eight failedretries. The port then transitions into the errdisable state. Which option describes what causes the port to go into the errdisable state?

Read More
FOR COMPLETE DUMPS4DOWNLOAD 300-115 DUMPS PDF FILE